ICTNWK305 Install and manage network protocols LMS 1
Knowledge Assessment
Unit code, name ICTNWK305 – Install and manage network protocols (1) Qualification/Course code, name ICT30118 - Certificate III in Information, Digital Media and Technology (2) TAFE NSW
Assessment instructions
Table 1 Assessment instructions
Assessment details |
Instructions |
Assessment overview |
The objective of this assessment is to assess your knowledge as would be required to install and manage network protocols. |
Assessment Event number |
1 of 2 |
Instructions for this assessment |
This is a written assessment and it will be assessing you on your knowledge of the unit. This assessment is in four parts: 1. Network protocol chart 2. Design an IP addressing scheme 3. Fill in the blanks 4. Short answer This assessment is supported by: · Assessment feedback |
Submission instructions |
When you have completed your assessment, submit it online for marking by your assessor. It is important that you keep a copy of all electronic and hardcopy assessments submitted to TAFE and complete the assessment declaration when submitting the assessment. |
What do I need to do to achieve a satisfactory result? |
To achieve a satisfactory result for this assessment all questions must be answered correctly. |
What do I need to provide? |
· Computer, internet and login details · USB drive or other storage method with enough free space to save work to. |
What the assessor will provide? |
Access to the Learning Management System. |
Due date and time allowed |
Indicative time to complete assessment: · 1.5 hours (90 minutes) |
Supervision |
Your assessor may ask for additional evidence to verify the authenticity of your submission and confirm that the assessment task was completed by you. |
Reasonable adjustment |
If you have a permanent or temporary condition that may prevent you from successfully completing the assessment event(s) in the way described, you should talk to your assessor about ‘reasonable adjustment’. This is the adjustment of the way you are assessed to take into account your condition, which must be approved BEFORE you attempt the assessment. |
Assessment feedback, review or appeals |
Appeals are addressed in accordance with Every Student’s Guide to Assessment in TAFE NSW. |
Part 1: Network protocol chart (OSI and TCP/IP model)
Fill out the following OSI and TCP/IP model network protocol chart with the correct information. You must fill all the blank cells in columns A, B, C, D. Use the following terms to complete column D at the correct OSI layers. (Telnet, HTTP, FTP, IPv6, SMTP, TCP, POP3, UDP, DNS, DHCP, IPv4, TIA/EIA (RJ-45/T568), 802.11, Ethernet IEEE802.3, SSH).
Table 2 - Network Protocol Chart
A |
B |
C |
D | |
OSI reference model Layer number and name |
Protocol data unit (PDU) |
TCP / IP model layer name |
Protocols / Standards | |
Part 2: Design an IP addressing scheme
Scenario continued: You are given an IPv4 network address 192.168.100.0/24 to be used when designing the IP addressing scheme. ABC Company requires four subnetworks to facilitate their department functions and management of the network.
- Identify the following information based on the given scenario.
Address class | |
Default subnet mask | |
Total number of subnets | |
Number of bits borrowed | |
Custom subnet mask | |
Number of usable host addresses per subnet |
- Design a network addressing scheme that allows for four Record the following information given below for each subnet.
Subnet 0 | |
Network address: | |
First usable host: | |
Last usable host: | |
Broadcast address: |
Subnet 1 | |
Network address: | |
First usable host: | |
Last usable host: | |
Broadcast address: |
Subnet 2 | |
Network address: | |
First usable host: | |
Last usable host: | |
Broadcast address: |
Subnet 3 | |
Network address: | |
First usable host: | |
Last usable host: | |
Broadcast address: |
For assessor completion only: |
Part 2 |
Satisfactory ☐ |
Unsatisfactory ☐ |
Part 3: Fill in the blanks
- Fill in the blanks with the correct network protocols and port numbers.
Protocol |
Port Number |
FTP | |
22 | |
DNS | |
HTTP | |
110 | |
67, 68 |
- Fill in the blanks, with the correct IPv4 first octet range and default subnet mask information according to the classful network architecture.
IPv4 class |
First octet range |
Default subnet mask |
A |
0 - | |
B | ||
C | ||
D |
N/A | |
E |
- 255 |
N/A |
Part 4: Short answer
- Summarise the features of the two major transmission control protocols and give an example of a use scenario for each.
- UDP
- TCP
- Summarise the key features of the two major IP protocols.
- IPv4
- IPv6
- Network protocols IPv4 and IPv6 would need to transcend (go beyond/scale with) organisational size and network complexity.Explain how you would allow for future growth of the organisation’s network and its complexity when designing IP addressing schemes.
Samples of TAFE Assignment Help Done by Our Experts for Students
- BSBWOR301 Organise personal work priorities and development
- CHCADV001 Assessment event 1 Scenario 1
- CHCADV001 Assessment event 2 Scenario 2
- CHCADV001 Assessment event 3 Case study
- CHCADV001 Assessment event 3 Letter
- CHCADV001 Assessment event 4
- CHCADV001 Facilitate the interests and rights of clients
- CHCCCS004 Assess co-existing needs
- CHCCCS019 Recognise and respond to crisis situations
- CHCCOM002 Use communication to build relationships
- CHCCSM005 Develop, facilitate and review all aspects of case management
- CHCPRP001 Develop and maintain networks and collaborative partnerships
- CHCPRT001 Identify and respond to children and young people at risk
- ICTICT301 Create user documentation LMS 1
- ICTICT301 Create user documentation LMS 2
- ICTICT301 Create user documentation LMS 3
- ICTICT304 Implement system software changes LMS 1
- ICTICT304 Implement system software changes LMS 2
- ICTNWK302 Determine and action network problems LMS 1
- ICTNWK302 Determine and action network problems LMS 2
- ICTNWK304 Administer network peripherals LMS 1
- ICTNWK304 Administer network peripherals LMS 2
- ICTNWK305 Install and manage network protocols LMS 1
- ICTNWK305 Install and manage network protocols LMS 2
- ICTPRG301 Apply introductory programming techniques SOA 1
- ICTPRG301 Apply introductory programming techniques SOA 2
- ICTSAS304 Provide basic system administration LMS 1
- ICTSAS304 Provide basic system administration LMS 2
- ICTSAS307 Install, configure and secure a small office or home office network LMS 1
- ICTSAS307 Install, configure and secure a small office or home office network LMS 2
- ICTSAS307 Install, configure and secure a small office or home office network LMS 3
- ICTSAS307 Install, configure and secure a small office or home office network LMS 4
- ICTSAS307 Install, configure and secure a small office or home office network LMS 5
- ICTSAS308 Run standard diagnostic tests LMS 1
- ICTSAS308 Run standard diagnostic tests LMS 2