Assignment On Comparison Of Chiller Assessment Answer

Key Topics

• Introduction
• Background 
• Analysis
• Chiller System 
• VRV System
• Hotel Industry of Hong Kong 
• Comparison between Chiller System & VRV System
• Conclusion
• Bibliography

Write an assignment on Comparison of Chiller system and VRV system in a Hong Kong hotel

Introduction

Energy conservation is gaining increasing importance with passing time (Emmanuel & Baker, 2012). OECD stated that conservation of energy is not only centred on saving the electricity costs but if immediate actions are not taken, and the present trend of energy expenditure is continued, emissions from energy will increase by 70% by the end of 2050 which can bring about faster negative consequences of climate change and rise of extreme weather conditions (OECD, 2011). Having said that, bringing about drastic changes is not possible but energy dependent industries have already started making adaptations which will distinctly reduce their carbon footprint. Hotel industry is one such industry and changes need to be brought about in the manner of cooling and heating solutions they utilize in their hotels.
A significant amount of energy is spent from HVAC (Heating, Ventilation and air Conditioning) Systems used in hotels globally. As per a report by Hong Kong SAR Government, approximate 17% of the total energy, which in turn signifies around one third of the total electric energy, is consumed by the HVAC Systems of hotels in Hong Kong, in 2006 (HK Gov, 2016). Hence, taking strategies to use more energy efficient HVAC systems and reengineering strategies will help in generation of maximum value from the least amount of resources spent. 

Background 

Systems of heating increase the temperature in order to make up for the heat losses which occur between outside and internal spaces in buildings. Systems of ventilations effectively supply the air to the space and attract the polluted air from the system. Cooling is required at this stage to lower the temperature in space where sun, people or equipments have risen the heat gains and are creating discomfort (Bob, Dencsak, & Bob, 2010). Hence, heating, air conditioning and ventilations are systems which vary widely in terms of the functions they perform. Certain of these systems are central to the building services, and were probably designed when the initial construction of such building occurred and helps the heating and cooling aspect. Other systems might be in place, which provide further heating through radiators and boilers with some restricted system of ventilation to introduce fresh air or cooling to the building. Certain buildings have individual cooling systems which have been added to buildings to counter overheating problems which were not thought of when the construction occurred (Deru & Torcellini, 2004). Therefore when ventilation, heating and cooling are aspects which are so different from one another, why are they considered to be holistically when thought of. This is because, the interaction of all these three aspects and with the building result in the optimal ambience and temperature for the residents, and in the case of hotel industry – the clients and the employees. What majority of hotel owners do, is they consider individual aspects of HVAC and does not take into consideration the holistic approach, which often leads to energy wastage. 
The importance of energy conservation cannot be stressed upon enough in the present environment (Gossling, Garrod, Aall, Hille, & Peeters, 2011). There are five aspects which determine the energy usage of an HVAC System. These are – the layout and design of the building which impacts the internal temperature and the humidity; the indoor temperature and the air quality and the required aspect of it namely, more the extreme temperatures, higher precision and more refined systems of air quality is required which consumes more energy; the generated internal heat from lighting, people and equipments all result in the warmth generated in the internal atmosphere; efficiency and design of the HVAC plant provides optimum moisture control, cooling and heating aspects required by the building and lastly, the operating times of the HVAC and the ability to use the controls also determined the energy usage (Perez-Lombard, Otiz, & Pout, 2008). A number of efforts have been made to reduce the energy usage by HVAC systems. As per Marriott in 2006, three approaches were present to enhance energy efficiency – optimizing the air flow temperature, energy recovering from the water in the condenser and using the geothermal pump mechanism (Foucquier, Robert, Suard, Stephan, & Jay, 2013). In 2006 again, Chan proposed an optimal control feature for HVAC systems of Hong Kong buildings, which lowered the demand of the cooling load and chilled water flows (Chan & Chow, 2004). Matthews et al, in 2002, apart from machine’s energy efficiency, the strategy of control also helps in resulting significant energy conservation (Li, Yang, & Lam, 2013). Of the overall review of literature, majority of studies were conducted in office and residential buildings but very less studies have been conducted on hotels and hospitality sector. Hospitality industry also consumers huge volumes of energy in tourist cities, like Hong Kong and hence this serves as a critical sector in which energy conservation must take place. 
However it is an easier said than done process as the energy performance of hotel buildings is difficult to investigate and compare, as they have different structural designs, functional facilities and requirements stemming from operations (Astrumsolar, 2013). A number of aspects impact the energy consumption in hotels namely, - star rating, number of rooms, carpet area, conference facilities, laundries and swimming pools, levels of occupancy, retail operations etc. However, for the purpose of this paper, chiller systems and VRV systems are to be compared in hotels which have the following features – three towers, restaurants, lobbies, car parks, ball rooms, gyms, lifts etc and consist of EL / ELV rooms, AHU and PAU rooms, boiler rooms irrespective of gas fire or boiler types, sprinkler water tanks, F.S, pump rooms, rooms for collection of rain waters etc.

Analysis

Chiller System 

A chiller is basically a machine which helps in the removal of heat from a liquid substance through the use of ARC or Absorption Refrigeration Cycle or the mechanism of vapour compression. This liquid substance can be put through a process of circulation through a mechanism called heat exchanger with the aim of cooling itself and associated equipments or a different process stream. Refrigeration thus happening creates waste heat as by product which must be recovered for heating purposes or exhausted to the atmosphere. In industrial, institutional and commercial facilities ranging from mid to large sized areas, chilled water is utilized to cool it. These water chillers can be evaporately cooled, air cooled or water cooled. Hence, a chiller basically acts as a device for transferring heat from a process load to that of the environment. These are used to lower the temperatures of different equipments as well as processes as well as to simply cool the portable water to that of optimal drinking level. Hence, the utility of chillers are felt all across industries and across different channels (Jin, Du, & Xiao, 2007). 
Typically, chillers consist of reservoirs which is filled with a fluid namely, water or ethylene glycol, or a mixture of both which is continuously circulated. In a building setting, such chilled water / liquid is circulated through the air-handler equipments or the chilled beams in an attempt to transfer the heat arising from air to water or the other way, that is, cooling transferred from the water to that of building air. Chillers are of two types – absorption chillers and the compression chillers based on the specific refrigerant cycle on which work is done (Jayamaha, 2006). Absorption chillers are machines which operate based on the cycle of vapour absorption and refrigeration and consists of four key exchangers of heat – generators, condensers, evaporators and lastly absorbers with two different kinds of solutions – the refrigerant and the absorbent. In a vapour compression chiller, the refrigerant gets in its vapour state by absorbing heat from the cooled water in evaporator. This refrigerant comes out of the evaporator in the vaporous state but on the other hand, extremely chilled water in produced. Therefore, heat is added to the refrigerant at a continuous pressure but similarly is extracted from the chilled water and these two don’t get mixed and are separated by a solid separator wall in between (Fong, Hanby, & Chow, 2006). 

VRV System

VRV System of Air-conditioning was first developed by Daikin in the early 1980s. There exists two terms for the same technology of HVAC – the VRV and the VRF. Daikin, a technology leader of the global HVAC Industry, had registered the VRV term – Variable Refrigerant Volume and it serves as an official trademark. Other companies therefore have to use VRF term for their similar HVAC Systems – the Variable Refrigerant Flow (Zhou, Wu, Wang, Shiochi, & Li, 2008). The term VRF hence has got more popularity because it can be used by various companies instead of VRV which is more proprietary. 
This VRV / VRF System is one of the most exclusive system of air-conditioning and is very well developed and sophisticated based on the following aspects – presence of a single refrigerant where it serves as the coolant material in the system; presence of inverter compressors which allow lowering of the consumption of power / energy with incomplete heating/cooling loads ; presence of several air handlers which act as indoor units on the very same refrigerant circuit and lastly, it has the ability of expansion modularly and finds immense applications for larger projects and processes. 
A typical VRV / VRF System consists of the following – an outdoor unit which can comprise of one or more than one processors, a number of indoor units which are often known as fan coils, the refrigerant piping which runs from the outdoor unit to that of all the indoor units consisting of copper distributers in pipes and the wiring which forms the communication channel between all the individual parts. The communication wiring in turn is made up of two cables which forms a closed network of loops and this structure is fundamental for all VRF Units. The main logic of operation for a VRF system is build inside the system and is different for different manufacturers. The user provides input to the system and as per the data, it implements its logic to reach the desired temperature using very optimal power expenditure (Pan, Yin, & Huang, 2008). 
Since VRV Function was mentioned herein, the specific technology by Daikin, has four significant strengths – the inverter technology and the precise control of the individual leads to significant energy conservation and less energy expenditure; adaptable design which helps in customizations as per the structure of the building; provides individual control whereby specific zones can have their own preferred climate and is ideal for commercial usage purpose and lastly the flexible layout, helps more in the use in large commercial and institutional places. Hence, for hotel industry, VRV system is definitely a better solution apparently. Technologically, this system consists of five factors – it provides a small type of large capacity compressor of inverter; it has a very highly integrated system of heat exchange; system promotes large airflow, quiet technology and a high static pressure externally; it has efficient automatic testing operations and lastly, it helps in improving the reliability as very high ambient temperatures. 

Hotel Industry of Hong Kong 

The hotel industry in Hong Kong is booming, and is expected to grow at a rapid rate in the future (HK Business, 2017). With hotels increasingly offering creative offerings to traditional tourists the number of hotels in Hong Kong is likely to increase and the level of occupancy remains high throughout due to work as well as business tourists. Large hotels along with having great imposing physical structures – towers which call for higher number of rooms and a number of associated facilities namely, more number of rooms, larger variety of restaurants, club rooms, gym rooms, car parks, health clubs, laundry facilities, swimming pools call for high energy consumption. Electricity is used by hotels for air conditioning, escalators and lifts, small power equipments and a host of other operational procedures. In a medium sized hotel in Hong Kong, the annual electricity bill amounts to millions of dollars thereby increasing the overall operating cost of a hotel. Hence, cumulative energy expenditure in the hotel industry of Hong Kong results in expenditure of billions of dollars. Apart from choosing the right cooling system, importance must be given to wise engineering strategies which will help in higher energy conservation. 

Comparison between Chiller System & VRV System

VRV Systems or more commonly known as VRF Systems are more sophisticated that the traditional Chiller Systems and such is the verdict received after conducting thorough review of the published literature in this field. However, in terms of what aspects VRF systems are given a benefit needs to be analyzed. Following paragraphs have compared the two systems analytically based on a number of criterion – energy efficiency and conservation; cost of operations; installation and maintenance cost; size of the system; environmental awareness and lastly the plausibility of using in traditional hotels with traditional structures where major engineering changes cannot be made. 
Primarily, VRF Systems are easier to install in comparison to Chillers (Goetzler, 2007). Chillers often require large cranes for installation, whereas in the case of VRF, the systems and individual units are lightweight and can be transported easily and have no problem in fitting into standard sized elevators. A number of the units can be used to cool in capacities of hundreds of tons. This relatively light weight of the units often do not require the reinforcement of the structural roofs, thereby making installation cost effective and labour effective. Ductwork is only required only for ventilation and hence, it reduces the building costs and height. VRF Systems are also efficient in retrofitting traditional buildings with operable windows and do not disturb the overall architecture and since the outdoor units are placed outside the building, no requirement for machine room is there thus saving space and maintenance costs (Teke & Timur, 2014). 
VRF /VRV Systems are more flexible in designs as a single unit for condensation can be linked to a number of indoor units of different capacities and configurations and this modularity aspect also helps in adapting the HVAC System to reconfigure or expand. In comparison chiller systems once established lack this kind of flexibility (Aynur, 2010). 

Chillers have an average life span of twenty to thirty years and would have a longer life than VRF systems typically. VRF Systems have more than one compressors creating higher probability of compressor failure although this enables the system to work fine even made repairs are made. Commissioning is easier however, for VRF systems as they aim towards plug and play manner of commissioning. The maintenance costs of VRF systems are also lower than chiller systems, which require issues of water treatment and are only concerned with cleaning of the coils and changing of filters (Chedwal, Mathur, Agarwal, & Dhaka, 2015). 
Comfort is a relative feature, but VRF Systems help in reaching the accurate temperature and can maintain different temperature zones within a building. This makes the system to be more comfortable than the traditional chiller systems. Also Chiller Systems involve a specific noise due to the presence of a number of fans in its operations, whereas VRV Systems have low noise levels (Bhatia, 2011). 
Energy efficiency is a game changer and it helps the potential users to choose between Chiller Systems or VRF Systems. Energy efficiency of VRV comes from a number of aspects. This system effectively eliminates duct losses and enables modulation of wide capacity. This specific approach helps in yielding high efficiency in part loading and translates into energy efficiency which is seasonal (Zhou, Wu, Wang, Shiochi, & Li, 2008). However, in certain cases of large spaces and larger structures, Chiller systems are considered to be more energy efficient as it produces larger cooling / heating from moderately small amount of electricity. VRF Systems are more suitable for smaller spaces and does effective cooling /heating. However, measuring the electricity expenditure and setting up systems for it is simple and cheaper in the case of VRF Systems in comparison to Chiller Systems (Teke & Timur, 2014). When it comes to large cooling purpose, chillers have higher COP or Coefficient of Performance, meaning for every unit of electricity spent more cooling is achieved. In VRF systems however, refrigerant is directly used as both the heat transfer fluid as well as the working fluid, and this makes the system more efficient than others which use water or air as the heat transfer fluid for the heating or cooling purposes. Hence, cooling spaces through VRV systems are done in an more efficient fashion as the refrigerant coolers don’t result in heat losses, which is a regular feature of chillers. When this is combined with supplies, energy will be saved. However, subtle energy efficiencies occur when VRF Systems are installed – namely, reduction in the losses of ducts, improved partial load efficiency, submetering etc (Aynur, 2010). 
Chilled systems are known to provide better air quality than VRF Systems, and this forms a significant choosing criteria. In hot and humid nations, people sweat and this results in build up of bacteria and parasites, hence, if humid air is continuously circulated, it might bring about sickness and conditions of allergy and creating the ambience unhygienic. AHU is present in chillers which result in dehumidifying the air and rendering it fresh and breathable. 
Installation costs for both chiller as well as VRF Systems are highly variable as they are dependent on the projects, and are quite difficult to pinpoint. As per certain studies, the installation costs of VRF Systems are expected to be slightly higher than chillers, but the actual real costs are dependent on projects. However, replacing a chiller system of an old structure with that of a new chiller system will be less expensive than installing a new VRF and systems of ventilation. The main cost issue lies in the fact that, VRF would require new system of refrigerant piping while the water piping of chillers would already be installed in the old structures (Goetzler, 2007). 
The above mentioned specifications make a separate case for Chiller and VRF Systems. VRF Systems are more sophisticated, easier to install, cheaper to maintain and though initial costs can be higher but till they will be economically viable in the long run. Accurate temperatures, maintaining multiple zone temperatures and energy efficiency can be obtained more for VRF Systems than chiller systems. Hence, depending on the situation provided, it is recommended that a VRF / VRV System be chosen for Hong Kong hotels where there are a minimum 3 towers, and a large number of facilities are in place. The rationale for such 

Conclusion

For the purpose of the given situation of a hotel in Hong Kong, the VRF / VRV System is selected as it is energy efficient and helps in maintaining different temperatures at different parts of the hotel which has different uses. The heating and cooling requirements of these spaces are not uniform and change throughout the day and as per use. Hence, VRV Systems are perfect for achieving such. The key benefits of the system can be felt in high energy efficiency and hence, high energy conservation and an environmental conscious image in the market; precision control of temperatures; simultaneous cooling and healing; zoned comfort and recovery of heat; modular and flexible designs; simpler to install and sophisticated and easier to use controls. However, the cost might prove to be slightly on the higher side but if one considers the host of advantages of the VRV System, then it is economically viable. The hotel in question does not have high rise towers which make it suitable for VRV Systems to be installed. With more importance placed on energy conservation and lessening of carbon footprint, increasingly companies are adopting means to bring about changes in their regular operations which will help in energy savings and lowering of resource expenditure (EST, 2007). Hotel industry is an industry extensive sector and needs to bring about conscious changes in their daily operations, of which choosing the right HVAC System is crucial if it wants to protect its environment for future generations. After careful consideration of all the factors, the VRV chosen as the right tool for the hotel in question. 

References

Astrumsolar. (2013). Renewable Energy is Great for Planet. Retrieved November 22, 2013, from Astrumsolar: http://www.astrumsolar.com/the-basics/environmental-benefits
Aynur, T. (2010). Variable refrigerant flow systems - A Review. Energy and Buildings , 42 (7), 1106 - 1112.
Baker, D., Bridges, D., Hunter, R., Johnson, G., Krupa, J., Murphy, J., et al. (2002). Guidebook to Decision Making Methods. USA: Department of Energy.
Bhatia, A. (2011). Centra;ized Vs DEcentralized Air Conditioning System,s. New York: Education and Development.
Bob, C., Dencsak, T., & Bob, L. (2010). Sustainability of Buildings. Proceedings of the 4th WSEAS International Conference on Renewable Energy Resources .
Chan, A., & Chow, T. (2004). Energy and economic performance of green roof system under future climatic conditions in Hong Kong. Energy and Buildings , 64, 182 - 198.
Chedwal, R., Mathur, J., Agarwal, G., & Dhaka, S. (2015). Energy saving potential through Energy Conservation Building Code and advance energy efficiency measures in hotel buildings of Jaipur City, India. Energy and Buildings , 92, 282 - 295.
Deru, M., & Torcellini, P. (2004). Improving Sustainability of Buildings Through a Performance - Based Design Approach. Proceedings of the 8th World Renewable Energy Congress and Expo .
Emmanuel, R., & Baker, K. (2012). Carbon Management in the Built Environment. UK: Routledge.
EST. (2007). Impact of carbon emissions. US: Environmental Science and Technology.
Fong, K., Hanby, V., & Chow, T. (2006). HVAC system optimization for energy management by evolutionary programming. Energy annd Buildings , 38 (3), 220-231.
Foucquier, A., Robert, S., Suard, F., Stephan, L., & Jay, A. (2013). State of the art in building modelling and energy performances prediction - A Review. Renewable and Sustainable Energy Reviews , 23, 272 - 288.
Goetzler, W. (2007). Variable refrigerant flow systems. Ashrae Journal , 49 (4), 24.
Gossling, S., Garrod, B., Aall, C., Hille, J., & Peeters, P. (2011). Food Management in Tourism: Reducing Tourisms Carbon Footprint. Tourism Management , 32 (3), 534-543.
HK Business. (2017). Hong Kong's 50 largest hotels in 2017. Hong Kong : Hong Kong Business.
HK Gov. (2016). Hong Kong's Action Ploan 2030+. Hong Kong: ENB Gov.
Jayamaha, L. (2006). Energy efficient building systems - green strategies for operation and maintenance - green strategies for operation and maintenance. Delhi: McGraw Hill Professional .
Jin, X., Du, Z., & Xiao, X. (2007). Energy evaluation of optimal control strategies for central VWV chiller systems. Applied Thermal Engineering , 27 (5 - 6 ), 934 - 941.
Li, D., Yang, L., & Lam, J. (2013). Zero energy buildings and sustainable development implications - a review. Energy , 54, 1 - 10.
OECD. (2011). OECD Environmental Outlook to 2050. US: OECD.
Pan, Y., Yin, R., & Huang, Z. (2008). Energy modeling of two office buildings with data center for green building design. Energy and Buildings , 40 (7), 1145 - 1152.
Perez-Lombard, L., Otiz, J., & Pout, C. (2008). A Review on Buildings Energy Consumption Information. Energy and Buildings , 40 (3), 394-398.
Teke, A., & Timur, O. (2014). Assessing the energy efficiency improvement potentials of HVAC systems considering economic and environmental aspects at the hospitals. Renewable and Sustainable Energy Reviews , 33, 224 - 235.
Zhou, Y., Wu, J., Wang, R., Shiochi, S., & Li, Y. (2008). Simulation and experimental validation of the variable refrigerant volume (VRV) air conditioning system in Energy Plus. Energy and Buildings , 40 (6), 1041 - 1047.