Sxe390 Science Practical Project: Determination Assessment Answers
Determination by g free fall Method (Gravicity)
Task 1: Produce a plan
Task 2
Answer:
Introduction
Gravity is able to pull all objects towards the center of the earth. This means that any object at height will move downwards. The rate at which the object is able to move from zero velocity is known as the gravitational pull. The gravitational pull, described by g is the maximum rate of accelerate, which an object can attain without addition any external forces. In the experiment to determine the acceleration of gravity, time of flight of a ball dropped from a known height is measured. The experiment also is used to verify that the mass of the ball does not affect the rate of acceleration by g. in the free fall experiment, an object is released from a height and it is freed from the top position. Recording of the time taken for the free fall was also done. The travel time is the time which the object is able to travel the known height. Most importantly, in the free fall determination of g, the air resistance is usually ignored. The ball is able to attain a uniform acceleration when released from a height and this is the g. previous studies have been able to conclude that g acceleration is usually in the downward direction and it is estimated to be about 9.8 m/s2. The description of this experiment will be carried out to proof that value for g.
Objective
The major objective of this experiment will be to determine the value of acceleration of any free falling object due to gravity. Lastly, the experiment will be able to make a comparison between the theoretical value of g, which is estimated to be 9.8 m/s2 and the obtained value of acceleration due to gravity.
Literature review
The idea of gravitational pull or gravitational acceleration, which is represented by g came with Sir Isaac Newton (Holzner & Wohns, 2010). He gave the idea that all objects near the earth fall towards its center with constant acceleration. The acceleration is as a result of constant gravitational pull and attraction towards the center (Tillery, Slater & Slater, 2017). When an object is dropped from an initial velocity of zero near the earth’s surface, the pull makes it to accelerate. This is usually a constant accelerate which is due to the gravity (g) pull. For the analysis, the motion of free falling objects is known to be one dimensional and they have constant acceleration, which is the g. Generally, the object starts off from an initial velocity of Vo, which is zero (Chen & Cook, 2013). The acceleration due to gravity a is constant and this means that the object will obey the following kinematics;
?s = v0t + ½ at2
Whereby;
s = height of the fall in meters
u = the initial velocity in ms-1
v = the final velocity in ms-1
a = the acceleration due to gravity, also represented as g ms-2
t = time taken for free fall in seconds
As noted earlier, the initial velocity is taken as zero. This means that the value of v0t turns out to be zero. The ?s is the change in height which the object is able to experience in respect to time t. “Any object, which is moving, and being acted upon only be the force of gravity is said to be "in a state of free fall" (Hilsen, Page & Physics Curriculum & Instruction (Firm), 2012)”. The definition isa able to bring out two importrant aspects of the free falling objects which include:
- The free falling object is free from the air resistance
- When air resistance is not available, the objects moving near the free falling objects will experience the same and uniform acceleration.
When the initial velocity is zero, the first equation reduces to;
Initial velocity =0 (ms-1) therefore,
s = 0t + ½ gt2
S = h = ½ gt2
Thus
g=2h/t2
Whereby;
g = the acceleration due to gravity in ms-2
h = vertical falling distance of object in m
t = time taken by the object to move the fall distance in seconds
The s in the equation can be replaced with h for the vertical height which the object falls. The experiment of determining the g through free fall will be based on this second equation. The key parameters which need to be measures are the time of travel or free fall of the object for the given known distance (Matolyak, & Abu?, 2014). The equation 2 will therefore be used to determine the acceleration or g due to gravity or free fall. Therefore, the above equation is able to proof that the value of g can be found for free falling objects through measuring of free falls time and knowing the height of falling.
Methodology
The use of the equations of motions is mostly applied when measuring the acceleration due to gravity (g). When using this method, the object is usually dropped from a height6 and time taken to cover the height is measured. The equation d = vi t + ½a t2 is applied to calculate the acceleration due to gravity g.
Procedure
1) First, the object is placed at a height with an initial height of 0.7 meters. The distance to the landing end is measured and recorded.
2) The object is then released from the height and the drop time is recorded. This step is repeated for several times and calculation of average time is measured and recorded.
3) The same step 2 is repeated with different heights and the different fall times taken by the objects are recorded for each drop.
4) The heights utilized in the experiment are between 1.0 meters to 1.7 meters, and their time taken is recorded.
5) The value of g is then calculated for the different heights and time recorded for each fall.
6) Lastly, the final average value for all the values of g is then calculated. In addition, a plot of h against 1/2t2 is also done as another method to find the value of gravitational acceleration g. after getting the value of g, the deviation from the accepted value is calculated to find the difference and deviation.
Table of results
|
Height (m) |
Ball time (s) |
2h (m) |
1/2t2 (s-2) |
Ball g value = h/2t2 (m/s2) |
|
0.7 |
0.4 |
1.4 |
0.08 |
8.75 |
|
1.1 |
0.469 |
2.2 |
0.11 |
|
|
1.2 |
0.490 |
2.4 |
0.12 |
|
|
1.3 |
0.510 |
2.6 |
0.13 |
|
|
1.35 |
0.529 |
2.7 |
0.14 |
|
|
1.55 |
0.562 |
3.1 |
0.158 |
|
|
1.7 |
0.597 |
3.4 |
0.178 |
Analysis
From the results, increasing the height is able to increase the time taken for the object to move to lowest point. The formula can be used to calculate the value of g through the free fall. In addition, a plot of h against 1/2t2 can be made (Hsu, 2011). Through this graph, the slope of the graph will be able to represent the value of g. This is simply the slope of the graph will be able to represent the change of h against the change of half t2. The graph’s slope is able to represent the g when the graphical method is used to determine the g value. This will simply lead to the formula details. The analysis shows that in order to find the value of g, the distance h and its relation with the value of ½ t2 is important. The h is able to represent the free fall of the object. More importantly, the initial velocity Vo of the object has to be maintained at zero. This means that the object had to generate its own velocity through the acceleration. The downward pull is the main force and accelerating force which is acting on the object. The analysis of the result will be therefore considered using both the graphical and formula modes.
Graphical analysis of the results
Figure 1: a graph of free fall height h against 1/2t2. Graph slope is able to represent the value of g
From the above figure 1, the data from the experiment was plotted. The graphical representation was done to give the best line of fit, in order to represent the linearly of the data obtained. The slope of the graph is calculated and found to be 9.93± 0.08m/s2 which represent the g. additionally, the y intercept is identified as 0.003+ 0.011m. The interception was assumed to be zero from the initial calculation considering that the initial velocity and distance of the object released was zero distance. The graphical representation of the value of interception as 0.003± 0.011 shows that there is some systematic error which will be translated to the final value of g as well. The systematic error is found in the measurement of the value of height. The measurement of the free fall distance is expected to be zero. Calculation of the error is important in order to understand the systematic error. The error has to be found from the value of g from the experiments and value g of 9.8 m/s2. From the graphical representation, the value of g is found to be 9.98 m/s2 with and error of ±0.08 m/s2. Moving to the lower end of the error, the result of the g will be 9.93-0.08 = 9.85 m/s2. This value of the g from the graph slope is near the value of g of 9.8 m/s2. This shows that there is no significant error on the measurement but only acceptable error. Therefore the g from the free fall is therefore close to the acceptable value of g. most importantly, it has to be noted that the line of best fit was used and this result may vary with the formula results. This is because some points have to be left out since the plotting had to show some key correlation of the points.
Formula analysis of the results
|
Height (m) |
Ball time (s) |
1/2t2 (s-2) |
Ball g value = h/2t2 (m/s2) |
|
0.7 |
0.4 |
0.08 |
8.75 |
|
1.1 |
0.469 |
0.11 |
10 |
|
1.2 |
0.490 |
0.12 |
10 |
|
1.3 |
0.510 |
0.13 |
10 |
|
1.35 |
0.529 |
0.14 |
9.64 |
|
1.55 |
0.562 |
0.158 |
9.81 |
|
1.7 |
0.597 |
0.178 |
9.55 |
|
Average value of g = h/2t2 |
8.55 | ||
From the formula calculation, the value of g was found to be 8.55 m/s2. The value has more error compared to the graphical representation method. This value of g is able to show that there are many errors which may have happened during the measurement of the drop height and the time taken by the object to attain the free fall. The errors are critical and able to disturb the significance of g which is found in the final g value. The percentage error in this value can be calculated as below;
% error = The accepted value of g - The experimental value of g X 100
The accepted value of g
% error = 9.81-8.55 x 100 = ± 12.844%
9.81
The error value in this method is ± 12.844% which is too high and unsatisfactory. In addition, errors in the measuring apparatus are another area where the error may originate. This may have affected the value of g and leading to the unsatisfactory value of g in the formula method. Therefore for the measurement of the g through the free fall, the graphical method can be recommended. This is because it is able to reduce the amount of error which is experienced in the final value.
Conclusion
The value of g is measured through dropping an object at height. The time taken to fall through the different height is note. It is noted that the g calculated is able to fall on certain range and this shows that the g due to gravity is a constant. Two key methods can be used to calculate the g as seen in the analysis. The graphical and formula methods are the key methods which were analyzed in this part. The graphical value of 9.93± 0.08m/s2 is near the most and recommended value of g of 9.81m/s2. Although the value is slightly higher, it is within an acceptable and satisfactory range. Therefore this method is more recommended since the slope method is able to reduce the error which is experienced in the final g value. High experimental errors are experienced and they are able to result to the high percentage difference between the calculated value and the accepted value. This error makes the value of g through this method unsatisfactory.
References
Chen, Y. T., & Cook, A. H. (2013). Gravitational experiments in the laboratory. Cambridge: Cambridge University Press.
Hilsen, D., Page, J., & Physics Curriculum & Instruction (Firm),. (2012). Physics demonstrations in mechanics. Lakeville, MN: Physcis Curriculum and Instruction.
Holzner, S., & Wohns, D. (2010). Physics essentials for dummies. Hoboken, NJ: Wiley Pub., Inc.
Hsu, T. (2011). Foundations of physics. Nashua, NH: CPO Science.
Matolyak, J., & Abu?, -H. A.-J. (2014). Essential physics. Boca Raton: CRC Press.
Tillery, B. W., Slater, S. J., & Slater, T. F. (2017). Physical science. New York, NY: McGraw-Hill Education.
Buy Sxe390 Science Practical Project: Determination Assessment Answers Online
Talk to our expert to get the help with Sxe390 Science Practical Project: Determination Assessment Answers to complete your assessment on time and boost your grades now
The main aim/motive of the management assignment help services is to get connect with a greater number of students, and effectively help, and support them in getting completing their assignments the students also get find this a wonderful opportunity where they could effectively learn more about their topics, as the experts also have the best team members with them in which all the members effectively support each other to get complete their diploma assignments. They complete the assessments of the students in an appropriate manner and deliver them back to the students before the due date of the assignment so that the students could timely submit this, and can score higher marks. The experts of the assignment help services at urgenthomework.com are so much skilled, capable, talented, and experienced in their field of programming homework help writing assignments, so, for this, they can effectively write the best economics assignment help services.
