Net502 Networking Fundamentals - Free Assessment Answers
Answer:
Fundamentals of Networking
|
Current Cabling |
Solution 1 |
Solution 2 | ||||||||||
|
Cabling Types |
§ CAT – 5 |
According to different length between routers and workstation, use a proper cable for better data transfer, such as CAT-6 and CAT-7 cables. CAT 8.2 cable will be better for connecting network-attached storage. |
For 100-meter length between devices use CAT – 6 cables and for 50-meter length between devices uses CAT-7 cables. CAT 8.2 cables can be used for patch cables for fast data transfer. It has ISO/IEC 11801-1:2017 standard. Standard cable reduce fault in network. | |||||||||
|
Speed of Cables |
|
CAT-6 cable can transfer data up to 1000 Mbps speed with the frequency 250 MHz Speed of data transfer is really matter. In case of horizontal cable, use a proper distance cable as per the requirement, such as CAT -6 for 100-meter length ( Laven, 2016). |
CAT- 7 cable can be transfer data with the 10 Gbps speed with the 600 MHz frequency. Data transfer Speed is required but length is a barrier for data transfer so used a proper cable for data transfer, according to requirement. Data transfer speed is also depending on the frequency of the cable.
| |||||||||
|
Main Function of Cables |
Cat- 5 – this cable is used for transfer data with the speed of 100 Mbps. It has 100 MHz signaling frequency. These cables are primarily used in networking environment. It is used in 100BaseX Ethernet architecture. It is used to connect computers, hubs, switches and print servers. It is also used for Asynchronous Transfer Mode architectures. Complete system is used CAT – Cables. It is 100BASE-TX standard.
|
For fast data transfer category, 6 cables will be used. Cat-6 is a 4-pair cable. It provides an improved performance as compared to Cat 5e. It has capacity to transfer data up to 1000 Mbps. It has 250 MHz signaling frequency. For connecting different buildings, optical fiber cable is best for fast data transfer. Use different cables, according to need, such as for patch cables use high quality cables. For horizontal cabling use CAT-6 Cables for data transfer. Always use proper standard cable for avoiding faults in network ( Rouse, 2010).
|
Category – 7 cables will be used for better data transfer but they are more costly compared to CAT-6 cables. Cat- 7 is a fully shielded twisted pair cable. It is operates at the signal frequency of 600 MHz. In case of connecting switch to device used CAT-7 for fast data transfer. Fully shielded means all the 4 pairs of a cable have an extra shield over them. In case of switch connection, use CAT- 8/ 8.1 or CAT-8.2 cables for high-speed data transfer. Properly used different cable according to requirements and it will be increase speed of data transfer. So use CAT- 6 for 100-meter length, CAT-7 for 50-meter length, and for 30-Meter length use CAT – 8 cables. |
Recommendation
- Use standard cable for increasing data transfer rate, such as ISO/IEC 11801-1:2017
- Standard cabling reduces faults in network
- Proper use of different cables as per requirement, as Patch cable
- For connecting network attached storage use CAT-8.2 cables.
Advantages of Wireless Access points
Wireless access points are so helpful for connecting multiple users. It has less costing with better services. There is no need to connect each system with cable and no need of such type of architecture. It is so simple to install an access point and connect it with the nearest router with the help of LAN cable as per requirement, which is based on the distance between access point and router. There are many access points with different features, such as range, data transfer speed, and frequency. It is also make easy access with high security of network. Some access points are used for open places, where cable management is difficult. Although, LAN cables are providing fast data transfer but access points are more better, when number of users are increased and it connect different devices at same time, such as mobile phones, laptops, and other networking devices.
References
Laven, K. (2016, June 27). Down to the Wire. Retrieved from ITEL: https://itel.com/understanding-network-cables/
Rouse, M. (2010, March 9). Categories of twisted pair cabling systems . Retrieved from searchdatacenter.techtarget.com: https://searchdatacenter.techtarget.com/definition/Categories-of-twisted-pair-cabling-systems
Buy Net502 Networking Fundamentals - Free Assessment Answers Online
Talk to our expert to get the help with Net502 Networking Fundamentals - Free Assessment Answers to complete your assessment on time and boost your grades now
The main aim/motive of the management assignment help services is to get connect with a greater number of students, and effectively help, and support them in getting completing their assignments the students also get find this a wonderful opportunity where they could effectively learn more about their topics, as the experts also have the best team members with them in which all the members effectively support each other to get complete their diploma assignments. They complete the assessments of the students in an appropriate manner and deliver them back to the students before the due date of the assignment so that the students could timely submit this, and can score higher marks. The experts of the assignment help services at urgenthomework.com are so much skilled, capable, talented, and experienced in their field of programming homework help writing assignments, so, for this, they can effectively write the best economics assignment help services.
