MN621 Smart Trends e-Business

Write a report on a network plan and configurations having following sections:

Analyse the need for the network for above case study. Investigate and propose a suitable complete network design for the case study.
Write a detailed setup of network devices only for a LAN.

Write a detailed implementation report which includes configurations of each networking device which are included in the whole network.

Demonstrate and compare at least 2 configuration results which may include at least two switches/routers and two PCs on physical networking devices.

Answer:

Smart Trends e-business is a fast upcoming business in the Malcony City. The growth witnessed is not only as a outcome of merger between two business enterprises but also quality services offered by our mentioned company and trust this company has won from its customers. As a result of this, Smart Trends e-business Company has decided to come up with a spacious office that will enable the e-commerce business perform its duties with respect to client requirements. In this task we are tasked to design the network and implement it according to WXY e-business requirements.

Project hardware requirements

Device Name	Manufacture Name	Series	Model	Ports	Quantity	Justification
Router	Cisco Systems	2900	Cisco	2 Serial 2 Giganet	1	1 router is required for communication of devices both inside and outside LAN i.e. routing
Firewall	Cisco Systems	5500	ASA	2 Ethernet 1 Serial	1	For traffic filtering incoming and outgoing packets to ensure systems security. Firewall will be embedded in the router.
Switch	Cisco Systems	2900	Cisco	48 Ethernet	5	1 switch for ground floor, 2 switches for 1^st floor and another two switches for third floor. Switches enable expansion of network. NB. It is assumed that our switches are 48 port
Wireless Router	Cisco systems	500	Cisco	2 Ethernet	3	1 for ground floor, another for 1^st floor and another for 2^nd floor. Devices that are incompatible with Ethernet LAN, will be using Wi-Fi.
Distribution Layer Switch	Cisco systems	3500	Cisco	24 Ethernet ports	1	To be used to bring together all switch traffic.

[1], [2]

Type of cables

Cable Type	Length(Metres)	Why needed
CAT 6	2500	For connection of data points and computing devices on the network

Other networking components

Component Name	Required Quantity	Why needed
4AU Cabinet Rack	1	For keeping server, router firewall and ground floor switch
Faceplates	500	For housing RJ45 female clips
RJ45 clips (female)	500	For Ethernet connection on workstations
2*3 ft cabinet	2	For housing 1^st and 2^nd floor switches
Trunkings	1000 metres	For covering of network cables
RJ45 clips (male)	500	For data point terminations
Patch panel	3	For LAN management

Specification of Computers used

Item Name	features	Why needed
PC	4gb RAM, 500gb HDD, Windows 10 Pro, 26 inch monitor, DVD reader, Keyboard and Mouse	These computers will be used for daily activities by employees.
Server	Windows Server 2008 OS, Broadcom Network controller, 4 drive bays, 5 USB port, 64gb RAM, RAID controllers, Intel C236 Chipset	Is used hosting printing services, messaging and webserver, file sharing, DHCP, mailing, DN, services
Laptops	Windows 10 Pro, 2*USB 3.1 Gen 1,i7, 1TB HDD,4gb, Wi-Fi, Bluetooth	For use by employees who will be outside in the field.

[3], [4]

Second floor requires two 48-port switches and wireless router to accommodate this floor’s population of 96 data points. Wireless router to be used for devices that are not supported by Ethernet LAN.

Ground floor

We require 1 48-port switch for extension of ground floor network. The ground floor has a total of 22 data points. 48-port switch will be used to allow future growth. Wireless router will be used to support computing devices that do not support Ethernet LAN.

First Floor.

This floor requires two 48-port switches and wireless router to accommodate this floor’s population of 90 data points. Wireless router to be used for devices that are not supported by Ethernet LAN.

Distribution layer switch will be used as a stub network to bring switches’ data communication to the router.

The router is used to route packets from client workstation to outside world.

Network device configurations

[7]

Router configuration

Router>

Router>ena

Router#conf ter

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#hos MAIN_ROUTER

MAIN_ROUTER(config)#serv pass

MAIN_ROUTER(config)#line vty ?

<0-4> <0-4> First Line number

MAIN_ROUTER(config)#line vty 0 4

MAIN_ROUTER(config-line)#pass cisc01

MAIN_ROUTER(config-line)#pass cisco1

MAIN_ROUTER(config-line)#logi

MAIN_ROUTER(config-line)#logg sy

MAIN_ROUTER(config-line)#exi

MAIN_ROUTER(config)#line c 0

MAIN_ROUTER(config-line)#pass cisco1

MAIN_ROUTER(config-line)#logi

MAIN_ROUTER(config-line)#logg sy

MAIN_ROUTER(config-line)#exi

MAIN_ROUTER(config)#ena sec cisco1

MAIN_ROUTER(config)#bann mot *UNAUTHORIZED ACCESS TO THIS ROUTER IS NOT ALLOWED*

MAIN_ROUTER(config)#inter fa0/0

MAIN_ROUTER(config-if)#ip add 10.10.20.7 255.255.255.0

MAIN_ROUTER(config-if)#no shu

00:06:08: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up

00:06:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

MAIN_ROUTER(config-if)#inter s0/0

MAIN_ROUTER(config-if)#ip add 207.200.69.56 255.255.255.252

Bad mask /30 for address 207.200.69.56

MAIN_ROUTER(config-if)#ip add 207.200.69.56 255.255.255.0

MAIN_ROUTER(config-if)#no shu

00:08:07: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up

00:08:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up

00:08:14: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down

00:08:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to down

MAIN_ROUTER(config-if)#ip route 0.0.0.0 0.0.0.0 fa0/0

MAIN_ROUTER(config)#end

MAIN_ROUTER#copy run start

Destination filename [startup-config]?

Building configuration...

[OK] Distribution lay

Switch>

Switch>ena

Switch#conf ter

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#host Layer3_Distribution_Switch

Layer3_Distribution_Switch(config)#ena sec cisco1

Layer3_Distribution_Switch(config)#serv pass

Layer3_Distribution_Switch(config)#bann mot *This is my Layer 3 distribution Switch*

Layer3_Distribution_Switch(config)#inter fa0/4

Layer3_Distribution_Switch(config-if)#switchport mode access

Layer3_Distribution_Switch(config-if)#switchport acc vla 10

% Access VLAN does not exist. Creating vlan 10

Layer3_Distribution_Switch(config-if)#inter fa0/2

Layer3_Distribution_Switch(config-if)#swit mod acc

Layer3_Distribution_Switch(config-if)#swi acc vla 20

% Access VLAN does not exist. Creating vlan 20

Layer3_Distribution_Switch(config-if)#inter f0/3

Layer3_Distribution_Switch(config-if)#switchport mod acc

Layer3_Distribution_Switch(config-if)#swi acc vla 30

% Access VLAN does not exist. Creating vlan 30

Layer3_Distribution_Switch(config-if)#inter vla 10

00:17:24: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan0010, changed state to up

Layer3_Distribution_Switch(config-if)#ip add 192.168.21.1

% Invalid input detected at '^' marker.

Layer3_Distribution_Switch(config-if)#ip add 192.168.21.1 255.255.255.224

Layer3_Distribution_Switch(config-if)#no shu

Layer3_Distribution_Switch(config-if)#inter vla 20

00:18:53: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan0020, changed state to up

Layer3_Distribution_Switch(config-if)#ip add 192.168.20.129 255.255.255.128

Layer3_Distribution_Switch(config-if)#inter vla 30

00:19:27: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan0030, changed state to up

Layer3_Distribution_Switch(config-if)#ip add 192.168.20.255.255.255.128

% Invalid input detected at '^' marker.

Layer3_Distribution_Switch(config-if)#ip add 192.168.20.1 255.255.255.128

Layer3_Distribution_Switch(config-if)#exi

Layer3_Distribution_Switch(config)#ip routing

Layer3_Distribution_Switch(config)#end

Layer3_Distribution_Switch#copy run start

Destination filename [startup-config]?

Building configuration...

IP Addressing

Let’s assume that ISP provided address is 192.168.20.3, our IP addressing as required by client will be subnetted as below. It should be noted that we are using VLSM method of subnetting to arrive at our subnets. [9]

Area	Size	Octet	Network	FUA	LUA	Mask
Floor 2	98	128	192.168.20.0	192.168.20.1	192.168.20.126	/25
Floor 1	92	128	192.168.20. 128	192.168.20.129	192.168.20.254	/25
Ground Floor	24	32	192.168.21.0	192.168.20.1	192.168.20.30	/27

Network configuration Demonstration

Distribution Layer Switch

Layer3_Distribution_Switch#sho run

Building configuration...

Current configuration : 1510 bytes

Version 12.3

service timestamps debug uptime

service timestamps log uptime

service password-encryption

hostname Layer3_Distribution_Switch

enable secret 5 $sdf$6978yhg$jnb76sd

ip cef

no ip domain-lookup

spanning-tree mode pvst

ip routing

spanning-tree extend system-id

interface FastEthernet0/3

switchport mode access

switchport access vlan 30!

interface FastEthernet0/4

switchport mode access

switchport access vlan 10

interface FastEthernet0/5

interface FastEthernet0/6

interface FastEthernet0/7

interface FastEthernet0/8!

interface FastEthernet0/9!

interface FastEthernet0/10!

interface FastEthernet0/11!

interface FastEthernet0/12!

interface GigabitEthernet0/

interface GigabitEthernet0/2

interface Vlan 1

no ip address

no ip route-cache

interface Vlan0010

ip address 192.168.21.1 255.255.255.224

no ip route-cache

interface Vlan0020

ip address 192.168.20.129 255.255.255.128

no ip route-cache

interface Vlan0030

ip address 192.168.20.1 255.255.255.128

no ip route-cache

vlan 10 name VLAN0010

vlan 20 name VLAN0020

vlan 30 name VLAN0030

ip classless

no ip http server

banner motd ^C

This is my Layer 3 distribution Switch^C

line con 0

line aux 0

line vty 0 4

no scheduler allocate

end

Showing Router Running Configurations

MAIN_ROUTER#sho ip inter brie

Interface IP-Address OK? Method Status Protocol

Serial0/0 207.200.69.56 YES unset down down

Serial0/1 unassigned YES unset administratively down down

FastEthernet0/0 10.10.20.7 YES unset up up

FastEthernet0/1 unassigned YES unset administratively down down

MAIN_ROUTER#sho run

Building configuration...

Current configuration : 947 bytes

Version 12.3

service timestamps debug uptime

service timestamps log uptime

service password-encryption!

hostname MAIN_ROUTER

enable secret 5 $sdf$6978yhg$jnb76sd

ip cef

no ip domain-lookup

interface Serial0/0

ip address 207.200.69.56 255.255.255.0

no ip directed-broadcast

interface Serial0/1

no ip address

no ip directed-broadcast

shutdown!

interface FastEthernet0/0

ip address 10.10.20.7 255.255.255.0

no ip directed-broadcast!

interface FastEthernet0/1

no ip address

no ip directed-broadcast

shutdown!

ip classless

no ip http server

ip route 0.0.0.0 0.0.0.0 FastEthernet0/0!

banner motd ^C

UNAUTHORIZED ACCESS TO THIS ROUTER IS NOT ALLOWED^C

line con 0

password 6843698657578

logging synchronous

line aux 0

line vty 0 4

password 68753368657578!

no scheduler allocate

Showing Distribution Switch interfaces

Layer3_Distribution_Switch#sho ip inter brie

Interface IP-Address OK? Method Status Protocol

Vlan 1 unassigned YES unset up up

Vlan0010 192.168.21.1 YES unset up up

Vlan0020 192.168.20.129 YES unset up up

Vlan0030 192.168.20.1 YES unset up up

FastEthernet0/1 unassigned YES unset up up

FastEthernet0/2 unassigned YES unset up up

FastEthernet0/3 unassigned YES unset up up

FastEthernet0/4 unassigned YES unset up up

FastEthernet0/5 unassigned YES unset down down

FastEthernet0/6 unassigned YES unset down down

FastEthernet0/7 unassigned YES unset down down

FastEthernet0/8 unassigned YES unset down down

FastEthernet0/9 unassigned YES unset down down

FastEthernet0/10 unassigned YES unset down down

FastEthernet0/11 unassigned YES unset down down

FastEthernet0/12 unassigned YES unset down down

GigabitEthernet0/1 unassigned YES unset down down

GigabitEthernet0/2 unassigned YES unset down down

Router Configuration

MainRouter>

MainRouter>ena

Password:

MainRouter#sho runn

Building configuration...

Current configuration : 834 bytes

version 15.1

no service timestamps log datetime msec

no service timestamps debug datetime msec

service password-encryption

hostname MainRouter!

enable secret 5 $1$mERr$hx5rVt7rPNoS4wqbXKX7m0

no ip cef

no ipv6 cef

license udi pid CISCO2901/K9 sn FTX15245EJV

spanning-tree mode pvst

interface GigabitEthernet0/0

ip address 10.10.10.10 255.255.255.0

duplex auto

speed auto

interface GigabitEthernet0/1

ip address 10.10.11.10 255.255.255.0

duplex auto

speed auto

interface Vlan1

no ip address

shutdown!

ip classless

ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0!

ip flow-export version 9

line vty 5 15

End

Showing router interfaces

MAIN_ROUTER#sho ip inter brie

Interface IP-Address OK? Method Status Protocol

Serial0/0 207.200.69.56 YES unset down down

Serial0/1 unassigned YES unset administratively down down

FastEthernet0/0 10.10.20.7 YES unset up up

FastEthernet0/1 unassigned YES unset administratively down down

Showing Router Route table

MAIN_ROUTER#sh ip route

Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default

U - per-user static route

Gateway of last resort is 0.0.0.0 to network 0.0.0.0

10.0.0.0/24 is subnetted, 1 subnets

C 10.10.20.0 is directly connected, FastEthernet0/0

S* 0.0.0.0/0 [1/0] via FastEthernet0/0

References

[1]	P. Ciccarelli, C. Faulkner and J. FitzGerald, Introduction to Networking Basics, Hoboken, New Jersey: John Wiley & Sons, 2012.
[2]	S. Noble, Building Modern Networks, Birmingham: Packt Publishing Ltd, 2017.
[3]	Arad, Nir, T. Daniel and M. Mondaeev, Hardware implementation of network testing and performance monitoring in a network device., 2010.
[4]	A. Bianco and F. Neri, Next Generation Optical Network Design and Modelling, New York City: Springer, 2013 .
[5]	M. Palmer, Hands-On Networking Fundamentals, Boston: Cengage Learning, 2012.
[6]	M. Meyers, CompTIA Network+ All-In-One Exam Guide, 5th Edition (Exam N10-005), Pennsylvania Plaza New York City: McGraw Hill Professional, 2012 .
[7]	T. Velte and A. Velte, Cisco A Beginner's Guide, Fifth Edition, Pennsylvania Plaza New York City: McGraw Hill Professional, 2013.
[8]	BRAGG, Network Security: The Complete Reference, Pennsylvania Plaza New York City: McGraw Hill Professional, 2012 .
[9]	‎. V. ‎. G. Diane Teare, Implementing Cisco IP Routing (ROUTE) Foundation Learning Guide, Indianapolis, Indiana: Cisco Press, 2014 .
[10]	‎. L. Glen E. Clarke, CompTIA Security+ Certification Boxed Set (Exam SY0-301), Pennsylvania Plaza New York City: McGraw Hill Professional, 2013.

Buy MN621 Smart Trends e-Business Answers Online

Talk to our expert to get the help with MN621 Smart Trends e-Business Answers to complete your assessment on time and boost your grades now

The main aim/motive of the management assignment help services is to get connect with a greater number of students, and effectively help, and support them in getting completing their assignments the students also get find this a wonderful opportunity where they could effectively learn more about their topics, as the experts also have the best team members with them in which all the members effectively support each other to get complete their diploma assignments. They complete the assessments of the students in an appropriate manner and deliver them back to the students before the due date of the assignment so that the students could timely submit this, and can score higher marks.Â The experts of the assignment help services at urgenthomework.com are so much skilled, capable, talented, and experienced in their field of programming homework help writing assignments, so, for this, they can effectively write the best economics assignment help services.

Get Online Support for MN621 Smart Trends e-Business Assignment Help Online

Resources

24 x 7 Availability.

Trained and Certified Experts.

Deadline Guaranteed.

Plagiarism Free.

Privacy Guaranteed.

Free download.

Online help for all project.

Homework Help Services

); }

Not the Exact Question you were looking for ? Post your question for assignment help and get instant help on your homework and assignment questions from our experts

MN621 Smart Trends e-Business

Answer:

References

Buy MN621 Smart Trends e-Business Answers Online

Get Online Support for MN621 Smart Trends e-Business Assignment Help Online Resources 24 x 7 Availability. Trained and Certified Experts. Deadline Guaranteed. Plagiarism Free. Privacy Guaranteed. Free download. Online help for all project. Homework Help Services

Resources

Get Online Support for MN621 Smart Trends e-Business Assignment Help Online

Resources

24 x 7 Availability.

Trained and Certified Experts.

Deadline Guaranteed.

Plagiarism Free.

Privacy Guaranteed.

Free download.

Online help for all project.

Homework Help Services